Skip to main content Jump to search Jump to main navigation

Destiny Street Bob | Slip-On Exhaust

Harley Davidson Street Bob

MILLER Destiny Street Bob Slip-On Exhaust for Harley Davidson Street Bob

More sound. More style. Street-legal.

Rediscover your Harley Davidson Street Bob with the MILLER Destiny Street Bob – a powerful slip-on muffler made from high-grade stainless steel. This exhaust not only delivers a rich, deep chopper sound but also features a slim, striking design that visually enhances your bike.

Thanks to the official Euro 5 approval with engraved certification number, the Destiny Street Bob is fully street-legal – for all Street Bob models from model year 2021.


Technical Highlights

✅ Horsepower +1.4 HP
✅ Torque +1.5 Nm
✅ Weight -1.1 KG


Your style – your end cap

Choose from three interchangeable end caps to match your style and your bike. The Destiny Street Bob slip-on exhaust is available in highly polished stainless steel or matte black heat-resistant coating – for a premium look and long-lasting durability.


Mount. Start. Ride.

Installation: the original header with catalytic converter remains in place – just remove the stock muffler, mount the Destiny Street Bob, and ride off legally. All necessary mounting hardware and your approval certificate with installation instructions are included.

Features "Destiny Street Bob | Slip-On Exhaust"

Brand: Harley-Davidson
Emissions standard : Euro 5
Engine (displacement): 114 cui
Family: Cruiser/Softail
Model: Street Bob
Model code: FXBBS
Model year: 2024, 2023, 2022, 2021

Videos

This is how it sounds "Destiny Street Bob | Slip-On Exhaust"

Exhaust system with racing dB absorber (not permitted)

Exhaust system without dB absorber (not permitted)

CLASSIC LINE + RETRO silencer with racing db absorber

1 from 1 Reviews

Average rating of 5 from 5 stars


100%

0%

0%

0%

0%


Rate this product!

Share your experiences with other customers.


1 Rating

23 March 2026 06:48

Rated 4.5 stars by 5 from 5

Absolutely thrilled!

The sound is really great, just as described, and it looks very lovely.

Yes, both are coated. On our complete exhaust systems, the header pipes and the silencers are coated. You can also choose polished header pipes with black silencers, or the other way round.

The MILLER coating
Our coating is a ceramic coating and heat-resistant up to 1200 °C. For matt black we use the colour RAL 9004 Signal Black matt.

Burn-in after first fitting
After the exhaust system has been fitted for the first time, the coating has to “burn in” at around 300 °C. After that it is fully cured and stays durable for decades.

Polished surfaces
Our MILLER exhaust systems are double-walled to prevent discolouration caused by heat. Discolouration can still occur at the connection and the cone of the silencer. It can easily be removed with MILLER polishing paste and a microfibre cloth.

You can easily reorder the approval card here: ECE-EC Approval Card. As soon as we receive your payment, we will send you the card straight away.

Approval of your exhaust system
Where stated for the product, MILLER exhaust systems have a valid EC or ECE type approval. The approval marking is located directly on the exhaust system or the silencer. You do not need to have the exhaust system entered in your vehicle documents as long as it is approved for your vehicle and used complete and unmodified.

Switzerland
Special rules apply in Switzerland. You can obtain a Swiss (CH) type approval from our Swiss general importer.

Questions?
You can reach our sales team by phone on +49 9132 745380 or by email at info@miller-exhaust.com.

Yes, with registration. To ride your MILLER exhaust system legally with a different air filter, you must have the exhaust system entered in your vehicle documents in combination with the other air filter.

Why registration is required
Our exhaust systems are always tested with the original air filter. The type approval only applies to the tested and approved condition. A different air filter changes this configuration, so the approval of the exhaust system does not cover the combination.

With the original air filter: no registration
If you ride your MILLER exhaust system with the original air filter, no registration is needed. The requirement is that the exhaust system is approved for your motorcycle model and used complete and unmodified, i.e. with the legal baffle, catalytic converter and link pipes.

No remapping required
When you replace your silencers with a MILLER slip-on, you do not need to adjust the engine management or have a remap done.

The approved vehicle types, variants and years are listed in the product description.

No, that is not possible. We only deliver our exhaust systems with the legal baffle fitted.

Road-legal from the factory
On all exhaust systems we deliver as road-legal, the legal baffle is already fitted at the factory. Delivery without a baffle or with a racing baffle is ruled out. This way your exhaust system matches the approved configuration when you fit it.

Secured since Euro 4
Since the introduction of the Euro 4 emission standard, removable noise-reducing parts must be secured so that they cannot be removed without visible or destructive changes. The baffle is therefore secured or welded in place.

Racing baffles only off the road
Racing baffles are intended exclusively for use off public roads, such as motorsport, the race track or show purposes. Fitting one is not legal on public roads, and the type approval may become invalid.

Finding the right baffle
Need a legal replacement baffle? Enter your motorcycle model and the E-number of your silencer on the product page dB-Absorber (Baffle). We will then determine the right baffle for you.

After a certain amount of use, the insulating wool in the silencer can settle. We are talking about a service life of around 50,000 km.

What the insulating wool does
Together with the baffle, the insulating wool in the silencer dampens the noise emissions. If it settles after long use, the sound of your exhaust system may change.

If your exhaust system is too loud
For our MILLER exhaust systems we offer the extra quiet Quiet baffle. If an official measurement found a value that is too high, first check whether the legal tolerance of +5 dB(A) on the registered stationary noise level was taken into account and whether the measurement was carried out correctly: microphone at a distance of 50 cm and at a 45-degree angle, exactly half the rated engine speed, engine fully warmed up, no sound-reflecting objects within 3 m and a level, asphalt surface.

Built to last
Our silencers are made in Germany from high-quality, heat- and corrosion-resistant stainless steel. If you have questions about the condition of your silencer, you can reach us by phone on +49 9132 745380 or by email at info@miller-exhaust.com.

Yes. MILLER Exhaust systems comply with all regulations in the EU countries and in Switzerland, so you can enjoy the MILLER sound without worry. A tolerance of +5 dB(A) applies to the stationary noise level entered in your vehicle registration document under field U.1.

What the approval is based on
Where stated for the product, our exhaust systems have a valid EC or ECE type approval. The tests are carried out by approved technical services in Europe. The approval always applies to the vehicle types and variants listed in the product description. Depending on model and year, we cover the emission standards Euro 1 to Euro 5+.

How to keep the approval valid

  • The product description lists your motorcycle model and year of manufacture.
  • The exhaust system is used complete and unmodified, i.e. with the legal baffle, catalytic converter and link pipes.
  • A racing baffle is not permitted on public roads.

You will find the approval marking directly on the exhaust system or the silencer. Special rules apply in Switzerland: you can obtain the Swiss (CH) type approval from our Swiss general importer.

Yes. Our coating is a ceramic coating and heat-resistant up to 1200 °C.

Important after first fitting: curing
After the exhaust system has been fitted for the first time, the coating has to “burn in” at around 300 °C. After that it is fully cured and stays durable for decades.

Colour
For our matt black coating we use the colour RAL 9004 Signal Black matt.

Header pipes and silencers
On our complete exhaust systems, both the header pipes and the silencers are coated. You can also choose polished header pipes with black silencers, or the other way round.

Double-walled against discolouration
Our MILLER exhaust systems are double-walled to prevent discolouration caused by heat. They are made in Germany, exclusively from stainless steel and aluminium.

MILLER Exhaust products are made in Germany, exclusively from stainless steel and aluminium, to ensure consistent and exceptional quality.

Made in Germany as a quality standard
Development, production and quality control at MILLER Exhaust all take place in Germany. For us, Made in Germany is not just a statement of origin but the foundation for consistent product quality, reliable fit and clean workmanship.

From tube to end cap
From machining and bending the tubes to welding, bracket and silencer production, polishing, end cap assembly and marking, we combine craftsmanship with modern manufacturing processes. We use high-quality stainless steel that is heat- and corrosion-resistant, strong and durable, as well as aluminium for selected end caps and components.

Developed on the motorcycle
Every exhaust system is developed on the specific motorcycle. We take into account installation space, pipe routing, clearance to swingarm and frame, thermal load, mounting points, lean angle and noise development.

Certified quality
Certification follows the procedures of TÜV International Certification and is monitored regularly.

The road closure in the Lech Valley applies to motorcycles with a registered stationary noise level of more than 95 dB(A). You can find your stationary noise level in your vehicle registration document under item U.1.

  • If your value is higher, you may not ride on these roads.
  • If the value is exactly 95 dB(A) or lower, these roads remain open to you.

What matters is therefore the stationary noise level registered in your vehicle documents. If you have fitted an approved, EC-tested MILLER Exhaust system in proper condition, you may of course continue to ride on these roads, provided your registered stationary noise level does not exceed the 95 dB(A) limit.

An aftermarket exhaust system approved under the EC directives does not change your registered stationary noise level. So if your vehicle documents show a stationary noise level of 95 dB(A) or lower, you may fit an exhaust system approved under the EC directives and continue to ride on these roads.

If a value above 95 dB(A) is registered, you may not ride on these roads between 15 April and 31 October. Unfortunately, we cannot offer an exhaust system that reduces the stationary noise level to below 95 dB(A).

Verification follows the procedures of TÜV International Certification for auditing, certification and verification and is monitored regularly.

Type approval of the exhaust systems
Where stated for the product, MILLER Exhaust systems have a valid EC or ECE type approval. The tests are carried out by approved technical services in Europe. The approval is always granted for specific vehicles and versions; the vehicle allocation in the product description is decisive. Depending on model and year, we cover the emission standards Euro 1 to Euro 5+.

Quality from Germany
Development, production and quality control take place in Germany. We manufacture exclusively from stainless steel and aluminium.

Marking
The approval marking is located directly on the exhaust system or the silencer. If the exhaust system is used unmodified, you do not need to have it entered in your vehicle documents.

1. Your exhaust system “feels” too loud
Extra-quiet dB absorbers are available for our MILLER exhaust systems. You can order them here: dB absorber Quiet

2. Your exhaust system is too loud according to an official test report

A: Was the tolerance taken into account and were the measurement guidelines followed?
You have a legal tolerance of +5 dB(A) on the registered stationary noise level. Please first check whether the legal tolerance was taken into account and whether the following conditions were met when your exhaust system was measured:

  • Microphone at a distance of 50 cm and at a 45-degree angle
  • Exactly half the rated engine speed
  • Engine fully warmed up
  • No sound-reflecting objects within a radius of 3 m around the vehicle
  • Level, tarmac surface

If these conditions are not met, the measurement result is very likely to be inaccurate. If you have doubts about the accuracy of the measurement, you can have it verified by a second testing station.

B: If all conditions were met and the measurement appears to be correct, please proceed as follows:

You bought the item directly from MILLER Exhaust:
Please email the following information/files to info@miller-exhaust.com:

  • Copy of the proof of purchase/order
  • Copy of the test report
  • Copy of the vehicle registration document
  • One or two photos of the removed absorber(s) (total size: max. 10 MB)

As soon as we have all the information, we will look into the issue and get back to you promptly.

You bought the item from one of our dealers:
Please contact the dealer you bought the product from directly and send them the information/files listed under B. Unfortunately, we cannot process your request directly in this case.

Our MILLER exhaust systems are double-walled to prevent discolouration caused by heat. Discolouration can still occur at the connection and the cone of the silencer.

How to remove discolouration
Discolouration can easily be removed with MILLER polishing paste and a microfibre cloth. It is best to work on the exhaust system once it has cooled down and polish the area until the discolouration has gone.

Why stainless steel can discolour
Where hot exhaust gases hit the material, stainless steel can develop heat tint. Thanks to the double-walled design, this only affects individual areas on MILLER exhaust systems, such as the connection and the cone.

Alternative: ceramic coating
Many MILLER exhaust systems are also available with a ceramic coating. It is heat-resistant up to 1200 °C. After first fitting it has to burn in at around 300 °C and then stays durable for decades. For matt black we use RAL 9004 Signal Black matt.

Material
We manufacture in Germany, exclusively from high-quality stainless steel and aluminium.

You can download the installation instructions here: miller-exhaust.com/support/anleitungen

Before fitting

  • Check in the product description that the exhaust system is approved for your motorcycle model, year of manufacture and emission class.
  • Check whether a catalytic converter is required and whether it is already part of the exhaust system or needed separately.
  • An additional document may be required for Switzerland.

When fitting
When you replace your silencers with a MILLER slip-on, neither a remap nor an adjustment of the engine management is required.

After fitting
On coated exhaust systems, the coating has to burn in at around 300 °C after first fitting. The legal baffle is fitted at the factory and stays in place on public roads.

We use the colour RAL 9004 Signal Black matt.

Ceramic coating up to 1200 °C
Our coating is a ceramic coating and heat-resistant up to 1200 °C. After first fitting it has to burn in at around 300 °C. After that it is fully cured and stays durable for decades.

Combinations
On our complete exhaust systems, the header pipes and the silencers are coated. You can also choose polished header pipes with black silencers, or the other way round.

Caring for polished surfaces
MILLER exhaust systems are double-walled to prevent discolouration caused by heat. You can remove discolouration at the connection and the cone of the silencer with MILLER polishing paste and a microfibre cloth.

You can obtain it from our Swiss general importer:
GoodDrive AG – Mr Thomas Albrecht
Im Grund 28, 5014 Gretzenbach, Switzerland
Phone: +41 62 893 05 02
www.ksmt.ch

Why Switzerland needs its own approval
Within the EU, no additional individual technical inspection is usually required if the vehicle allocation is correct and the exhaust system is used unmodified. Special rules apply in Switzerland, however.

Check before ordering
Check in the product description whether the exhaust system is approved for your vehicle and whether an additional document is needed for Switzerland.

Riding legally
MILLER Exhaust systems comply with the regulations in the EU countries and in Switzerland. The approval only applies to the tested condition with the legal baffle and, where intended, the catalytic converter.

No. Our exhaust systems are approved for your motorcycle model. You do not need to have them entered in your vehicle registration document.

The requirements
A validly type-approved exhaust system does not need to be registered as long as it is approved for your vehicle and used complete and unmodified in the approved configuration. This includes all parts relevant to the approval, such as the baffle, catalytic converter and link pipes. The approved vehicle types, variants and years are listed in the product description.

Proof on the motorcycle
The approval marking is located directly on the exhaust system or the silencer. If you are missing the matching ECE-EC approval card, you can reorder it in our shop.

When registration is required after all

  • You ride with an air filter other than the original one. Our exhaust systems are always tested with the original air filter, so the combination has to be entered in your vehicle documents.
  • If the exhaust system is modified, for example by removing the legal baffle, the type approval may become invalid.

Special rules apply in Switzerland. You can obtain the Swiss (CH) type approval from our Swiss general importer.

Yes. You can reach our sales team on +49 9132 745380.

What to have ready
To help us find the right exhaust system for you, please have your motorcycle details ready: model and type approval, year of manufacture or first registration and the applicable emission class. For a baffle we also need the E-number of your silencer.

Other ways to order

Payment methods in the online shop
In the online shop you can pay by prepayment via bank transfer with 2% discount, PayPal, credit card, Klarna, Amazon Pay, Apple Pay / Google Pay, SEPA direct debit and DHL cash on delivery, among others.

Dealers and workshops
As a dealer, workshop or reseller you can register in our shop and order directly from the manufacturer.

Yes. Simply send us your order with your address and phone number to info@miller-exhaust.com.

What to include in your email

  • the items you want, ideally with item number
  • your motorcycle model, year of manufacture or first registration and the type approval
  • for baffles, the E-number of your silencer
  • your address and phone number

Other ways to order
You can also order directly in the online shop or call our sales team on +49 9132 745380.

Does the exhaust system fit your motorcycle?
Not every exhaust system is suitable for every vehicle and emission class. The vehicle allocation in the product description is decisive. If you have any questions, we will be happy to help.

The following payment methods are available at MILLER Exhaust:

  • Prepayment (bank transfer) with 2% discount
  • DHL cash on delivery
  • Amazon Pay
  • Credit card
  • Klarna
  • Bancontact
  • EPS
  • iDEAL
  • P24
  • SEPA direct debit
  • Apple Pay / Google Pay
  • PayPal

2% discount for prepayment
If you pay in advance by bank transfer, you receive a 2% discount.

Local payment methods
In addition to internationally common payment methods, we also offer local ones, for example Bancontact (Belgium), EPS (Austria), iDEAL (Netherlands) and P24 (Poland).

Ordering by phone or email
You can also order by phone on +49 9132 745380 or by email at info@miller-exhaust.com.

Skip product gallery

Matching products

Tool kit for removing mounted dB-absorbers (baffles) showing two sets A and B with alloy extraction hooks, hex Allen keys with guide pin, bolts, washers and a tube of copper paste — matching tool for MILLER CUSTOMBIKE exhaustsClose-up of extractor hook and Allen key being used to remove a dB-absorber (baffle) from a MILLER CUSTOMBIKE motorcycle exhaust; alloy steel extraction tool inserted into the silencer for easy dismantling.
Extractor Hook for dB-Absorber (Baffle) Tool kit dB-Absorber (Baffle)
Model wearing black MILLER hoodie, 100% cotton zip-up pullover with drawstring hood, kangaroo pocket, front logo Ø7cm and larger back logo Ø18cm – casual hooded sweatshirtBack view of model wearing black MILLER Hoodie, 100% cotton hooded sweatshirt (pullover with zipper) featuring a large circular MILLER logo on the back (Ø18cm) and smaller front logo (Ø7cm).
MILLER Hoodie Original Miller Hoodie
Size: M
Illustration of MILLER CUSTOMBIKE Racing db-Absorber (baffle) showing perforated end and red direction arrow; increases noise and power by approx. 5–7 dB, produces a bassier, more powerful sound, includes mounting, sold per piece

Average rating of 5 from 5 stars

db-Absorber (Baffle) Racing increased sound and power output
Heat protection plate made of VA4 stainless steel, 15 cm length, polished finish shown with clamp; fits manifold/crane diameters 50–60 mm, available polished or black matt

Average rating of 5 from 5 stars

Heat protection plate Header diameter 50-60 mm
Black MILLER T-Shirt worn by model, 100% cotton short sleeve round neck, front logo Ø7cm and back logo Ø18cm, casual fitRear view of a model wearing a black MILLER T-Shirt, 100% cotton, short-sleeve with round neck, featuring large back logo Ø18cm and small front logo Ø7cm.
MILLER T-Shirt Original Miller T-Shirt
CH certificate document alongside the MILLER logo – official Swiss CH approval (DTC/FAKT) for MILLER exhaust systems, available to order for street-legal use and MFK registration in Switzerland
CH Type Approval DIN A4 document
Exhaust Cleaner MILLER Exhaust
Exhaust Cleaner MILLER ExhaustClean 250ml
Tin of MILLER PolishPro polishing paste for stainless steel and chrome exhausts on a grey microfibre cloth, removes discoloration and fine scratches to restore a deep mirror shine
Polishing Paste MILLER PolishPro 50ml